This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Opening ports after install?
#1
Opening ports after install?
So I've read the ports one needs to make sure are open after install here https://docs.sentora.org/?node=40 but do I need to edit the /etc/apache2/apache2.conf file to make sure sentora listens on port 80 and port 443? Is there any information on this that I'm missing?
Reply
Thanks given by:
#2
RE: Opening ports after install?
(09-24-2024, 01:18 AM)kevwebbie Wrote: So I've read the ports one needs to make sure are open after install here https://docs.sentora.org/?node=40 but do I need to edit the /etc/apache2/apache2.conf file to make sure sentora listens on port 80 and port 443? Is there any information on this that I'm missing?

No. You do not need to edit any config files. you just need to make sure the ports are opened in your firewall and forwarded to your server IP if you are using a router.
Note: Do NOT edit the /etc/apache2/apache2.conf!
If you need to for some reason like customization you would edit /etc/sentora/configs/apache/httpd.conf Be sure to make a backup first!
-TGates - Project Council

SEARCH the Forums or read the DOCUMENTATION before posting!
Support Sentora and Donate: HERE

Find my support or modules useful? Donate to TGates HERE
Developers and code testers needed!
Contact TGates for more information
Reply
Thanks given by:
#3
RE: Opening ports after install?
The ports are allowed by ufw firewall but apache not listening on those ports. I've never had problems with installation before. I notice /etc/sentora/configs/apache/httpd.conf is listening on the correct ports but its not included in the apache conf file.
Reply
Thanks given by:
#4
RE: Opening ports after install?
(09-25-2024, 01:23 AM)kevwebbie Wrote: The ports are allowed by ufw firewall but apache  not listening on those ports. I've never had problems with installation before. I notice  /etc/sentora/configs/apache/httpd.conf is listening on the correct ports but its not included in the apache conf file.

That's because Sentora uses the httpd.conf and not the apache.conf for changes. That is why it is important not to edit certain files. Remember, everything is automatically configured during the Sentora install. Reinstalling any part of the web server after Sentora is installed will break your Sentora install because they will install default config files and things won't be setup up properly.

Your apache.conf file should look like this:
Code:
# This is the main Apache server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See http://httpd.apache.org/docs/2.4/ for detailed information about
# the directives and /usr/share/doc/apache2/README.Debian about Debian specific
# hints.
#
#
# Summary of how the Apache 2 configuration works in Debian:
# The Apache 2 web server configuration in Debian is quite different to
# upstream's suggested way to configure the web server. This is because Debian's
# default Apache2 installation attempts to make adding and removing modules,
# virtual hosts, and extra configuration directives as flexible as possible, in
# order to make automating the changes and administering the server as easy as
# possible.

# It is split into several files forming the configuration hierarchy outlined
# below, all located in the /etc/apache2/ directory:
#
# /etc/apache2/
# |-- apache2.conf
# | `--  ports.conf
# |-- mods-enabled
# | |-- *.load
# | `-- *.conf
# |-- conf-enabled
# | `-- *.conf
# `-- sites-enabled
# `-- *.conf
#
#
# * apache2.conf is the main configuration file (this file). It puts the pieces
#  together by including all remaining configuration files when starting up the
#  web server.
#
# * ports.conf is always included from the main configuration file. It is
#  supposed to determine listening ports for incoming connections which can be
#  customized anytime.
#
# * Configuration files in the mods-enabled/, conf-enabled/ and sites-enabled/
#  directories contain particular configuration snippets which manage modules,
#  global configuration fragments, or virtual host configurations,
#  respectively.
#
#  They are activated by symlinking available configuration files from their
#  respective *-available/ counterparts. These should be managed by using our
#  helpers a2enmod/a2dismod, a2ensite/a2dissite and a2enconf/a2disconf. See
#  their respective man pages for detailed information.
#
# * The binary is called apache2. Due to the use of environment variables, in
#  the default configuration, apache2 needs to be started/stopped with
#  /etc/init.d/apache2 or apache2ctl. Calling /usr/bin/apache2 directly will not
#  work with the default configuration.


# Global configuration
#

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# NOTE!  If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the Mutex documentation (available
# at <URL:http://httpd.apache.org/docs/2.4/mod/core.html#mutex>);
# you will save yourself a lot of trouble.
#
# Do NOT add a slash at the end of the directory path.
#
# ServerRoot "/etc/apache2"

#
# The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
#
# Mutex file:${APACHE_LOCK_DIR} default

#
# The directory where shm and other runtime files will be stored.
#

DefaultRuntimeDir ${APACHE_RUN_DIR}

#
# PidFile: The file in which the server should record its process
# identification number when it starts.
# This needs to be set in /etc/apache2/envvars
#
PidFile ${APACHE_PID_FILE}

#
# Timeout: The number of seconds before receives and sends time out.
#
Timeout 300

#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive On

#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100

#
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
#
KeepAliveTimeout 5


# These need to be set in /etc/apache2/envvars
User ${APACHE_RUN_USER}
Group ${APACHE_RUN_GROUP}

#
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
#
HostnameLookups Off

# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog ${APACHE_LOG_DIR}/error.log

#
# LogLevel: Control the severity of messages logged to the error_log.
# Available values: trace8, ..., trace1, debug, info, notice, warn,
# error, crit, alert, emerg.
# It is also possible to configure the log level for particular modules, e.g.
# "LogLevel info ssl:warn"
#
LogLevel warn

# Include module configuration:
IncludeOptional mods-enabled/*.load
IncludeOptional mods-enabled/*.conf

# Include list of ports to listen on
# Include ports.conf
# Ports are now handled in Sentora vhosts file


# Sets the default security model of the Apache2 HTTPD server. It does
# not allow access to the root filesystem outside of /usr/share and /var/www.
# The former is used by web applications packaged in Debian,
# the latter may be used for local directories served by the web server. If
# your system is serving content from a sub-directory in /srv you must allow
# access here, or in any related virtual host.
<Directory />
Options FollowSymLinks
AllowOverride None
Require all denied
</Directory>

<Directory /usr/share>
AllowOverride None
Require all granted
</Directory>

<Directory /var/www/>
Options Indexes FollowSymLinks
AllowOverride None
Require all granted
</Directory>

#<Directory /srv/>
# Options Indexes FollowSymLinks
# AllowOverride None
# Require all granted
#</Directory>




# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives.  See also the AllowOverride
# directive.
#
AccessFileName .htaccess

#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
<FilesMatch "^\.ht">
Require all denied
</FilesMatch>


#
# The following directives define some format nicknames for use with
# a CustomLog directive.
#
# These deviate from the Common Log Format definitions in that they use %O
# (the actual bytes sent including headers) instead of %b (the size of the
# requested file), because the latter makes it impossible to detect partial
# requests.
#
# Note that the use of %{X-Forwarded-For}i instead of %h is not recommended.
# Use mod_remoteip instead.
#
LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined
LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %O" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent

# Include of directories ignores editors' and dpkg's backup files,
# see README.Debian for details.

# Include generic snippets of statements
IncludeOptional conf-enabled/*.conf

# Include the virtual host configurations:
# IncludeOptional sites-enabled/*.conf

# vim: syntax=apache ts=4 sw=4 sts=4 sr noet
Include /etc/sentora/configs/apache/httpd.conf
-TGates - Project Council

SEARCH the Forums or read the DOCUMENTATION before posting!
Support Sentora and Donate: HERE

Find my support or modules useful? Donate to TGates HERE
Developers and code testers needed!
Contact TGates for more information
Reply
Thanks given by:
#5
RE: Opening ports after install?
I got it working . Thanks very much fir all your information, help and for building an excellent control panel. It is the best web control panel I've ever had the plasue of using and I really appreciate your hard work!
Reply
Thanks given by:
#6
RE: Opening ports after install?
(09-26-2024, 10:49 PM)kevwebbie Wrote: I got it working . Thanks very much fir all your information, help and for building an excellent control panel. It is the best web control panel I've ever had the plasue of using and I really appreciate your hard work!

That's good news! You are welcome and thank you!
-TGates - Project Council

SEARCH the Forums or read the DOCUMENTATION before posting!
Support Sentora and Donate: HERE

Find my support or modules useful? Donate to TGates HERE
Developers and code testers needed!
Contact TGates for more information
Reply
Thanks given by:


Possibly Related Threads…
Thread Author Replies Views Last Post
How to install SSL certificate in clients website chgener 6 25 ,478 02-16-2021, 01:56 AM
Last Post: mlinke
How to install php 5.6 on centos 6/7 working 100%: DimitarBG 32 257 ,969 07-18-2020, 04:07 AM
Last Post: BloodySky
Questions regarding install and config procedures nathanstotts 0 4 ,138 08-21-2018, 11:44 PM
Last Post: nathanstotts

Forum Jump:


Users browsing this thread: 1 Guest(s)