This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

New Fedora 24 Installation ... incomming
#1
New Fedora 24 Installation ... incomming
Hi,
 
I'm using Fedora 24 as home server, Linux learning stuff and fun. Lately, I'm just looking for a free web host panel option for my mini multi-vhost management. I knew zpanel, tried to install it, but too many bugs and problems. Zpanel looked dead, even on Wiki. I was sad till I found Sentora. God Thanks!! Zpanel is alive!!

So I tried to setup them installation for Fedora with success!!  I have to try some stuffs for being sure to don’t have Bugs. I have a little one with the postfix, but I don’t see any problem at the end of the installation. Everything working well.
So after some s scripts optimizations and validations, I will be able to send my installation script on the forum for Fedora, even if it’s not officially support by Sentora. Fedora is a Red Hat (CentOS brother distribution) with the advantages of Ubuntu, so why not? Big Grin

If you are interested to have the script for test before release, just to send me a private message.

Thank you!

Vous pouvez m’écrire en français aussi!
 
Eulogy
Reply
Thanks given by:
#2
RE: New Fedora 24 Installation ... incomming
Fedore is based on same Redhat brach as centos so should not require a lot of changes to work, mainly in OS detection routines.

M B
No support using PM (Auto adding to IGNORE list!), use the forum. 
How to ask

200$ free to start your VPS 60 days credit
Reply
Thanks given by:
#3
RE: New Fedora 24 Installation ... incomming
(08-09-2016, 10:17 PM)Me.B Wrote: Fedore is based on same Redhat brach as centos so should not require a lot of changes to work, mainly in OS detection routines.

M B

Yeap almost. 

I add to change some stuffs about the repo, dependency and installation comportment, but it was easy. I just want to re-pass the script before release.

Eulogy
Reply
Thanks given by:
#4
RE: New Fedora 24 Installation ... incomming
Here we go for the fedora install script. I suppose this script can works for Fedora 23, but I didn't test it. I've aslo put somes owncloud dependencies and I fix a bug with mysql-postfix requeirement on my first install script version.

You will have a error about a foreign key on the postfix database table, but it's look to have no impact in the end of the installation. You have the choice to setup or disable the firewalld. It's the default setup zone for FedoraServer. The default zone for CenOs is the public one.


Just to copy the script on a file with vi or an other text editor

save it

# chmod +x your_file_name
# ./your_file_name


Enjoy!
------------------------------------------------------------------------

Code:
#!/usr/bin/env bash
# Official Sentora Automated Installation Script
# =============================================
#
#  This program is free software: you can redistribute it and/or modify
#  it under the terms of the GNU General Public License as published by
#  the Free Software Foundation, either version 3 of the License, or
#  (at your option) any later version.
#
#  This program is distributed in the hope that it will be useful,
#  but WITHOUT ANY WARRANTY; without even the implied warranty of
#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#  GNU General Public License for more details.
#
#  You should have received a copy of the GNU General Public License
#  along with this program.  If not, see <http://www.gnu.org/licenses/>.
#
# Supported Operating Systems: CentOS 6.*/7.* Minimal, Ubuntu server 12.04/14.04
#  32bit and 64bit
#
#  Author Pascal Peyremorte (ppeyremorte@sentora.org)
#    (main merge of all installers, modularization, reworks and comments)
#  With huge help and contributions from Mehdi Blagui, Kevin Andrews and
#  all those who participated to this and to previous installers.
#  Thanks to all.

SENTORA_INSTALLER_VERSION="1.0.4-alpha"
SENTORA_CORE_VERSION="1.0.0"
SENTORA_PRECONF_VERSION="1.0.3"

PANEL_PATH="/etc/sentora"
PANEL_DATA="/var/sentora"

#--- Display the 'welcome' splash/user warning info..
echo ""
echo "############################################################"
echo "#  Welcome to the Official Sentora Installer $SENTORA_INSTALLER_VERSION  #"
echo "############################################################"

echo -e "\nChecking that minimal requirements are ok"

# Ensure the OS is compatible with the launcher
if [ -f /etc/centos-release ]; then
   OS="CentOs"
   VERFULL=$(sed 's/^.*release //;s/ (Fin.*$//' /etc/centos-release)
   VER=${VERFULL:0:1} # return 6 or 7
elif [ -f /etc/fedora-release ]; then
OS="Fedora"
VER=$(rpm -qa \*-release | grep -Ei "fedora" | cut -d"-" -f3)
elif [ -f /etc/lsb-release ]; then
   OS=$(grep DISTRIB_ID /etc/lsb-release | sed 's/^.*=//')
   VER=$(grep DISTRIB_RELEASE /etc/lsb-release | sed 's/^.*=//')
else
   OS=$(uname -s)
   VER=$(uname -r)
fi
ARCH=$(uname -m)

echo "Detected : $OS  $VER  $ARCH"

if [[ "$OS" = "CentOs" && ("$VER" = "6" || "$VER" = "7" ) ||
     "$OS" = "Ubuntu" && ("$VER" = "12.04" || "$VER" = "14.04" )  ||
     "$OS" = "Fedora" && ("$VER" = "23" || "$VER" = "24" ) ]] ; then
   echo "Ok."
else
   echo "Sorry, this OS is not supported by Sentora."
   exit 1
fi

# Centos uses repo directory that depends of architecture. Ensure it is compatible
if [[ "$OS" = "CentOs" || "$OS" = "Fedora" ]] ; then
   if [[ "$ARCH" == "i386" || "$ARCH" == "i486" || "$ARCH" == "i586" || "$ARCH" == "i686" ]]; then
       ARCH="i386"
   elif [[ "$ARCH" != "x86_64" ]]; then
       echo "Unexpected architecture name was returned ($ARCH ). :-("
       echo "The installer have been designed for i[3-6]8- and x86_64' architectures. If you"
       echo " think it may work on your, please report it to the Sentora forum or bugtracker."
       exit 1
   fi
fi

# Check if the user is 'root' before allowing installation to commence
if [ $UID -ne 0 ]; then
   echo "Install failed: you must be logged in as 'root' to install."
   echo "Use command 'sudo -i', then enter root password and then try again."
   exit 1
fi

# Check for some common control panels that we know will affect the installation/operating of Sentora.
if [ -e /usr/local/cpanel ] || [ -e /usr/local/directadmin ] || [ -e /usr/local/solusvm/www ] || [ -e /usr/local/home/admispconfig ] || [ -e /usr/local/lxlabs/kloxo ] ; then
   echo "It appears that a control panel is already installed on your server; This installer"
   echo "is designed to install and configure Sentora on a clean OS installation only."
   echo -e "\nPlease re-install your OS before attempting to install using this script."
   exit 1
fi

# Check for some common packages that we know will affect the installation/operating of Sentora.
if [[ "$OS" = "CentOs" ]] ; then
   PACKAGE_INSTALLER="yum -y -q install"
   PACKAGE_REMOVER="yum -y -q remove"

   inst() {
      rpm -q "$1" &> /dev/null
   }

   if  [[ "$VER" = "7" || "$VER" = "23" ]]; then
       DB_PCKG="mariadb" &&  echo "DB server will be mariaDB"
   else
       DB_PCKG="mysql" && echo "DB server will be mySQL"
   fi
   HTTP_PCKG="httpd"
   PHP_PCKG="php"
   BIND_PCKG="bind"

elif [[ "$OS" = "Fedora" ]] ; then
   PACKAGE_INSTALLER="dnf -y -q install"
   PACKAGE_REMOVER="dnf -y -q remove"

   inst() {
      rpm -q "$1" &> /dev/null
   }

   DB_PCKG="mariadb" &&  echo "DB server will be mariaDB"
   HTTP_PCKG="httpd"
   PHP_PCKG="php"
   BIND_PCKG="bind"

elif [[ "$OS" = "Ubuntu" ]]; then
   PACKAGE_INSTALLER="apt-get -yqq install"
   PACKAGE_REMOVER="apt-get -yqq remove"

   inst() {
      dpkg -l "$1" 2> /dev/null | grep '^ii' &> /dev/null
   }

   DB_PCKG="mysql-server"
   HTTP_PCKG="apache2"
   PHP_PCKG="apache2-mod-php5"
   BIND_PCKG="bind9"
fi

# Note : Postfix is installed by default on centos netinstall / minimum install.
# The installer seems to work fine even if Postfix is already installed.
# -> The check of postfix is removed, but this comment remains to remember
for package in "$DB_PCKG" "dovecot-mysql" "$HTTP_PCKG" "$PHP_PCKG" "proftpd" "$BIND_PCKG" ; do
   if (inst "$package"); then
       echo "It appears that package $package is already installed. This installer"
       echo "is designed to install and configure Sentora on a clean OS installation only!"
       echo -e "\nPlease re-install your OS before attempting to install using this script."
       exit 1
   fi
done

# *************************************************
#--- Prepare or query informations required to install

# Update repositories and Install wget and util used to grab server IP
echo -e "\n-- Installing wget and dns utils required to manage inputs"
if [[ "$OS" = "CentOs" ]]; then
   yum -y update
   $PACKAGE_INSTALLER bind-utils
elif [[ "$OS" = "Fedora" ]]; then
   dnf -y update
   $PACKAGE_INSTALLER bind-utils
elif [[ "$OS" = "Ubuntu" ]]; then
   apt-get -yqq update  
#ensure
we can install
   $PACKAGE_INSTALLER dnsutils
fi
$PACKAGE_INSTALLER wget

extern_ip="$(wget -qO- http://api.sentora.org/ip.txt)"
#local_ip=$(ifconfig eth0 | sed -En 's|.*inet [^0-9]*(([0-9]*\.){3}[0-9]*).*$|\1|p')
local_ip=$(ip addr show | awk '$1 == "inet" && $3 == "brd" { sub (/\/.*/,""); print $2 }')

# Enable parameters to be entered on commandline, required for vagrant install
#   -d <panel-domain>
#   -i <server-ip> (or -i local or -i public, see below)
#   -t <timezone-string>
# like :
#   sentora_install.sh -t Europe/Paris -d panel.domain.tld -i xxx.xxx.xxx.xxx
# notes:
#   -d and -i must be both present or both absent
#   -i local  force use of local detected ip
#   -i public  force use of public detected ip
#   if -t is used without -d/-i, timezone is set from value given and not asked to user
#   if -t absent and -d/-i are present, timezone is not set at all

while getopts d:i:t: opt; do
 case $opt in
 d)
     PANEL_FQDN=$OPTARG
     INSTALL="auto"
     ;;
 i)
     PUBLIC_IP=$OPTARG
     if [[ "$PUBLIC_IP" == "local" ]] ; then
         PUBLIC_IP=$local_ip
     elif [[ "$PUBLIC_IP" == "public" ]] ; then
         PUBLIC_IP=$extern_ip
     fi
     ;;
 t)
     echo "$OPTARG" > /etc/timezone
     tz=$(cat /etc/timezone)
     ;;
 esac
done

if [[ ("$PANEL_FQDN" != "" && "$PUBLIC_IP" == "") ||
     ("$PANEL_FQDN" == "" && "$PUBLIC_IP" != "") ]] ; then
   echo "-d and -i must be both present or both absent."
   exit 2
fi


if [[ "$tz" == "" && "$PANEL_FQDN" == "" ]] ; then
   # Propose selection list for the time zone
   echo "Preparing to select timezone, please wait a few seconds..."
   $PACKAGE_INSTALLER tzdata
   # setup server timezone
   if [[ "$OS" = "CentOs" ]]; then
       # make tzselect to save TZ in /etc/timezone
       echo "echo \$TZ > /etc/timezone" >> /usr/bin/tzselect
       tzselect
       tz=$(cat /etc/timezone)
   elif [[ "$OS" = "Fedora" ]]; then
cp -n /usr/share/zoneinfo/zone.tab  /usr/share/zoneinfo/zone1970.tab
       echo "echo \$TZ > /etc/timezone" >> /usr/bin/tzselect
       tzselect
       tz=$(cat /etc/timezone)
   elif [[ "$OS" = "Ubuntu" ]]; then
       dpkg-reconfigure tzdata
       tz=$(cat /etc/timezone)
   fi
fi
# clear timezone information to focus user on important notice
clear

# Installer parameters
if [[ "$PANEL_FQDN" == "" ]] ; then
   echo -e "\n\e[1;33m=== Informations required to build your server ===\e[0m"
   echo 'The installer requires 2 pieces of information:'
   echo ' 1) the sub-domain that you want to use to access Sentora panel,'
   echo '   - do not use your main domain (like domain.com)'
   echo '   - use a sub-domain, e.g panel.domain.com'
   echo '   - or use the server hostname, e.g server1.domain.com'
   echo '   - DNS must already be configured and pointing to the server IP'
   echo '       for this sub-domain'
   echo ' 2) The public IP of the server.'
   echo ''

   PANEL_FQDN="$(/bin/hostname)"
   PUBLIC_IP=$extern_ip
   while true; do
       echo ""
       read -e -p "Enter the sub-domain you want to access Sentora panel: " -i "$PANEL_FQDN" PANEL_FQDN

       if [[ "$PUBLIC_IP" != "$local_ip" ]]; then
         echo -e "\nThe public IP of the server is $PUBLIC_IP. Its local IP is $local_ip"
         echo "  For a production server, the PUBLIC IP must be used."
       fi
       read -e -p "Enter (or confirm) the public IP for this server: " -i "$PUBLIC_IP" PUBLIC_IP
       echo ""

       # Checks if the panel domain is a subdomain
       sub=$(echo "$PANEL_FQDN" | sed -n 's|\(.*\)\..*\..*|\1|p')
       if [[ "$sub" == "" ]]; then
           echo -e "\e[1;31mWARNING: $PANEL_FQDN is not a subdomain!\e[0m"
           confirm="true"
       fi

       # Checks if the panel domain is already assigned in DNS
       dns_panel_ip=$(host "$PANEL_FQDN"|grep address|cut -d" " -f4)
       if [[ "$dns_panel_ip" == "" ]]; then
           echo -e "\e[1;31mWARNING: $PANEL_FQDN is not defined in your DNS!\e[0m"
           echo "  You must add records in your DNS manager (and then wait until propagation is done)."
           echo "  For more information, read the Sentora documentation:"
           echo "   - http://docs.sentora.org/index.php?node=7 (Installing Sentora)"
           echo "   - http://docs.sentora.org/index.php?node=51 (Installer questions)"
           echo "  If this is a production installation, set the DNS up as soon as possible."
           confirm="true"
       else
           echo -e "\e[1;32mOK\e[0m: DNS successfully resolves $PANEL_FQDN to $dns_panel_ip"

           # Check if panel domain matches public IP
           if [[ "$dns_panel_ip" != "$PUBLIC_IP" ]]; then
               echo -e -n "\e[1;31mWARNING: $PANEL_FQDN DNS record does not point to $PUBLIC_IP!\e[0m"
               echo "  Sentora will not be reachable from http://$PANEL_FQDN"
               confirm="true"
           fi
       fi

       if [[ "$PUBLIC_IP" != "$extern_ip" && "$PUBLIC_IP" != "$local_ip" ]]; then
           echo -e -n "\e[1;31mWARNING: $PUBLIC_IP does not match detected IP !\e[0m"
           echo "  Sentora will not work with this IP..."
               confirm="true"
       fi

       echo ""
       # if any warning, ask confirmation to continue or propose to change
       if [[ "$confirm" != "" ]] ; then
           echo "There are some warnings..."
           echo "Are you really sure that you want to setup Sentora with these parameters?"
           read -e -p "(y):Accept and install, (n):Change domain or IP, (q):Quit installer? " yn
           case $yn in
               [Yy]* ) break;;
               [Nn]* ) continue;;
               [Qq]* ) exit;;
           esac
       else
           read -e -p "All is ok. Do you want to install Sentora now (y/n)? " yn
           case $yn in
               [Yy]* ) break;;
               [Nn]* ) exit;;
           esac
       fi
   done
fi

# ***************************************
# Installation really starts here

#--- Set custom logging methods so we create a log file in the current working directory.
logfile=$(date +%Y-%m-%d_%H.%M.%S_sentora_install.log)
touch "$logfile"
exec > >(tee "$logfile")
exec 2>&1

echo "Installer version $SENTORA_INSTALLER_VERSION"
echo "Sentora core version $SENTORA_CORE_VERSION"
echo "Sentora preconf version $SENTORA_PRECONF_VERSION"
echo ""
echo "Installing Sentora $SENTORA_CORE_VERSION at http://$PANEL_FQDN and ip $PUBLIC_IP"
echo "on server under: $OS  $VER  $ARCH"
uname -a

# Function to disable a file by appending its name with _disabled
disable_file() {
   mv "$1" "$1_disabled_by_sentora" &> /dev/null
}

#--- AppArmor must be disabled to avoid problems
if [[ "$OS" = "Ubuntu" ]]; then
   [ -f /etc/init.d/apparmor ]
   if [ $? = "0" ]; then
       echo -e "\n-- Disabling and removing AppArmor, please wait..."
       /etc/init.d/apparmor stop &> /dev/null
       update-rc.d -f apparmor remove &> /dev/null
       apt-get remove -y --purge apparmor* &> /dev/null
       disable_file /etc/init.d/apparmor &> /dev/null
       echo -e "AppArmor has been removed."
   fi
fi

#--- Adapt repositories and packages sources
echo -e "\n-- Updating repositories and packages sources"
if [[ "$OS" = "CentOs" ]]; then
   
#EPEL
Repo Install
   EPEL_BASE_URL="http://dl.fedoraproject.org/pub/epel/$VER/$ARCH";
   if  [[ "$VER" = "7" ]]; then
       EPEL_FILE=$(wget -q -O- "$EPEL_BASE_URL/e/" | grep -oP '(?<=href=")epel-release.*(?=">)')
       wget "$EPEL_BASE_URL/e/$EPEL_FILE"
   else
       EPEL_FILE=$(wget -q -O- "$EPEL_BASE_URL/" | grep -oP '(?<=href=")epel-release.*(?=">)')
       wget "$EPEL_BASE_URL/$EPEL_FILE"
   fi
   $PACKAGE_INSTALLER -y install epel-release*.rpm
   rm "$EPEL_FILE"

   
#To
fix some problems of compatibility use of mirror centos.org to all users
   
#Replace
all mirrors by base repos to avoid any problems.
   sed -i 's|mirrorlist=http://mirrorlist.centos.org|#mirrorlist=http://mirrorlist.centos.org|' "/etc/yum.repos.d/CentOS-Base.repo"
   sed -i 's|#baseurl=http://mirror.centos.org|baseurl=http://mirror.centos.org|' "/etc/yum.repos.d/CentOS-Base.repo"

   
#check
if the machine and on openvz
   if [ -f "/etc/yum.repos.d/vz.repo" ]; then
       sed -i "s|mirrorlist=http://vzdownload.swsoft.com/download/mirrors/centos-$VER|baseurl=http://vzdownload.swsoft.com/ez/packages/centos/$VER/$ARCH/os/|" "/etc/yum.repos.d/vz.repo"
       sed -i "s|mirrorlist=http://vzdownload.swsoft.com/download/mirrors/updates-released-ce$VER|baseurl=http://vzdownload.swsoft.com/ez/packages/centos/$VER/$ARCH/updates/|" "/etc/yum.repos.d/vz.repo"
   fi

   
#disable
deposits that could result in installation errors
   disablerepo() {
       if [ -f "/etc/yum.repos.d/$1.repo" ]; then
           sed -i 's/enabled=1/enabled=0/g' "/etc/yum.repos.d/$1.repo"
       fi
   }
   disablerepo "elrepo"
   disablerepo "epel-testing"
   disablerepo "remi"
   disablerepo "rpmforge"
   disablerepo "rpmfusion-free-updates"
   disablerepo "rpmfusion-free-updates-testing"

   # We need to disable SELinux...
   sed -i 's/SELINUX=enforcing/SELINUX=disabled/g' /etc/selinux/config
   setenforce 0

   # Stop conflicting services and iptables to ensure all services will work
   service sendmail stop
   chkconfig sendmail off

   # disable firewall
   if  [[ "$VER" = "7" ]]; then
       FIREWALL_SERVICE="firewalld"
   else
       FIREWALL_SERVICE="iptables"
   fi
   service "$FIREWALL_SERVICE" save
   service "$FIREWALL_SERVICE" stop
   chkconfig "$FIREWALL_SERVICE" off

   # Removal of conflicting packages prior to Sentora installation.
   if (inst bind-chroot) ; then
       $PACKAGE_REMOVER bind-chroot
   fi
   if (inst qpid-cpp-client) ; then
       $PACKAGE_REMOVER qpid-cpp-client
   fi

elif [[ "$OS" = "Fedora" ]]; then
   
#EPEL
Repo Install
dnf -y install https://dl.fedoraproject.org/pub/epel/epel-release-latest-7.noarch.rpm

   
#To
fix some problems of compatibility use of  to all users
   
#Replace
all mirrors by base repos to avoid any problems.  metalink=http://mirrors.fedoraproject.org/metalink?repo=fedora-$VER&arch=$basearch
   sed -i 's|metalink=http://mirrors.fedoraproject.org/metalink?repo=fedora-$VER&arch=$basearch|#metalink=http://mirrors.fedoraproject.org/metalink?repo=fedora-$VER&arch=$basearch|' "/etc/yum.repos.d/fedora.repo"
   sed -i 's|#baseurl=http://download.fedoraproject.org/pub/fedora/linux/releases/$releasever/Everything/$basearch/os/|baseurl=http://download.fedoraproject.org/pub/fedora/linux/releases/$releasever/Everything/$basearch/os/|' "/etc/yum.repos.d/fedora.repo"

   
#check
if the machine and on openvz
# I set the fedora 23 release for now. Only 1 repo available, so don't need to fix the mirroir. Just add the 24 when it will be available. Not tested on Fedora23 with OpenVZ
#if
[[ "$VER" = "23" ]]; then
# if dnf repolist --all | grep vzdownload ; then
# dnf config-manager --add-repo http://vzdownload.swsoft.com/download/mirrors/fedora-$VER
# dnf config-manager --add-repo http://vzdownload.swsoft.com/download/mirrors/updates-released-f$VER
# fi
#fi

   
#disable
deposits that could result in installation errors
   disablerepo() {
       if dnf repolist --all | grep $1 ; then
           dnf config-manager --set-disabled $1
           echo -e "-- Repo $1 has been disabled"
       else
           echo -e "-- Repo $1 not enabled"
       fi
   }
   disablerepo "elrepo"
   disablerepo "epel-testing"
   disablerepo "remi"
   disablerepo "rpmforge"
   disablerepo "rpmfusion-free"
   disablerepo "rpmfusion-free-updates"
   disablerepo "rpmfusion-nonfree"
   disablerepo "rpmfusion-nonfree-updates"
   disablerepo "rpmfusion-free-updates-testing"

   # Set it permissive for keep the log only...
   sed -i 's/SELINUX=enforcing/SELINUX=permissive/g' /etc/selinux/config
   setenforce 0

   # Stop conflicting services and iptables to ensure all services will work
if systemctl status sendmail | grep inactive ; then
echo -e "-- Sendmain is inactive"
else
systemctl stop sendmail.service
systemctl disable sendmail.service
fi

       FIREWALL_SERVICE="firewalld"


while true; do
read -e -p "Do you want to disable(d) the firewalld or doing the default setup(s) for sentora (d/s)? " fic
case $fic in
[Dd]* )
systemctl stop "$FIREWALL_SERVICE"
systemctl disable "$FIREWALL_SERVICE"
break;;
[Ss]* )
# That setup in for the default setup for FedoraServer
firewall-cmd --permanent --zone=FedoraServer --add-service=http
firewall-cmd --permanent --zone=FedoraServer --add-service=https
firewall-cmd --permanent --zone=FedoraServer --add-service=pop3
firewall-cmd --permanent --zone=FedoraServer --add-service=imap
firewall-cmd --permanent --zone=FedoraServer --add-service=dns
firewall-cmd --permanent --zone=FedoraServer --add-service=smtp
firewall-cmd --permanent --zone=FedoraServer --add-service=ftp
firewall-cmd --reload
break;;
esac
done
   

   # Removal of conflicting packages prior to Sentora installation.
   if (inst bind-chroot) ; then
       $PACKAGE_REMOVER bind-chroot
   fi
   if (inst qpid-cpp-client) ; then
       $PACKAGE_REMOVER qpid-cpp-client
   fi

elif [[ "$OS" = "Ubuntu" ]]; then
   # Update the enabled Aptitude repositories
   echo -ne "\nUpdating Aptitude Repos: " >/dev/tty

   mkdir -p "/etc/apt/sources.list.d.save"
   cp -R "/etc/apt/sources.list.d/*" "/etc/apt/sources.list.d.save" &> /dev/null
   rm -rf "/etc/apt/sources.list/*"
   cp "/etc/apt/sources.list" "/etc/apt/sources.list.save"

   if [ "$VER" = "14.04" ]; then
       cat > /etc/apt/sources.list <<EOF
#Depots
main restricted
deb http://archive.ubuntu.com/ubuntu $(lsb_release -sc) main restricted universe multiverse
deb http://archive.ubuntu.com/ubuntu $(lsb_release -sc)-security main restricted universe multiverse
deb http://archive.ubuntu.com/ubuntu $(lsb_release -sc)-updates main restricted universe multiverse
EOF
   else
       cat > /etc/apt/sources.list <<EOF
#Depots
main restricted
deb http://archive.ubuntu.com/ubuntu/ $(lsb_release -sc) main restricted
deb http://security.ubuntu.com/ubuntu $(lsb_release -sc)-security main restricted
deb http://archive.ubuntu.com/ubuntu/ $(lsb_release -sc)-updates main restricted

deb-src http://archive.ubuntu.com/ubuntu/ $(lsb_release -sc) main restricted
deb-src http://archive.ubuntu.com/ubuntu/ $(lsb_release -sc)-updates main restricted
deb-src http://security.ubuntu.com/ubuntu $(lsb_release -sc)-security main restricted

#Depots
Universe Multiverse
deb http://archive.ubuntu.com/ubuntu/ $(lsb_release -sc) universe multiverse
deb http://security.ubuntu.com/ubuntu $(lsb_release -sc)-security universe multiverse
deb http://archive.ubuntu.com/ubuntu/ $(lsb_release -sc)-updates universe multiverse

deb-src http://archive.ubuntu.com/ubuntu/ $(lsb_release -sc) universe multiverse
deb-src http://security.ubuntu.com/ubuntu $(lsb_release -sc)-security universe multiverse
deb-src http://archive.ubuntu.com/ubuntu/ $(lsb_release -sc)-updates universe multiverse
EOF
   fi
fi

#--- List all already installed packages (may help to debug)
echo -e "\n-- Listing of all packages installed:"
if [[ "$OS" = "CentOs" || "$OS" = "Fedora" ]]; then
   rpm -qa | sort
elif [[ "$OS" = "Ubuntu" ]]; then
   dpkg --get-selections
fi

#--- Ensures that all packages are up to date
echo -e "\n-- Updating+upgrading system, it may take some time..."
if [[ "$OS" = "CentOs" ]]; then
   yum -y update
   yum -y upgrade
elif [[ "$OS" = "Fedora" ]]; then
   dnf -y update
   dnf -y upgrade
elif [[ "$OS" = "Ubuntu" ]]; then
   apt-get -yqq update
   apt-get -yqq upgrade
fi

#--- Install utility packages required by the installer and/or Sentora.
echo -e "\n-- Downloading and installing required tools..."
if [[ "$OS" = "CentOs"  ]]; then
   $PACKAGE_INSTALLER sudo vim make zip unzip chkconfig bash-completion
   $PACKAGE_INSTALLER ld-linux.so.2 libbz2.so.1 libdb-4.7.so libgd.so.2
   $PACKAGE_INSTALLER curl curl-devel perl-libwww-perl libxml2 libxml2-devel zip bzip2-devel gcc gcc-c++ at make
   $PACKAGE_INSTALLER redhat-lsb-core
elif [[ "$OS" = "Fedora" ]]; then
   $PACKAGE_INSTALLER sudo vim make zip unzip chkconfig bash-completion
   $PACKAGE_INSTALLER ld-linux.so.2 libbz2.so.1 libdb4 gd
   $PACKAGE_INSTALLER curl curl-devel perl-libwww-perl libxml2 libxml2-devel zip bzip2-devel gcc gcc-c++ at make
   $PACKAGE_INSTALLER redhat-lsb-core
$PACKAGE_INSTALLER php-pecl-zip.x86_64 openssl mod_ssl php-pecl-apcu.x86_64 git # Those are optionals, but very usefull for web hosting / owncloud and SSL setup
elif [[ "$OS" = "Ubuntu" ]]; then
   $PACKAGE_INSTALLER sudo vim make zip unzip debconf-utils at build-essential bash-completion
fi

#--- Download Sentora archive from GitHub
echo -e "\n-- Downloading Sentora, Please wait, this may take several minutes, the installer will continue after this is complete!"
# Get latest sentora
while true; do
   wget -nv -O sentora_core.zip https://github.com/sentora/sentora-core/archive/$SENTORA_CORE_VERSION.zip
   if [[ -f sentora_core.zip ]]; then
       break;
   else
       echo "Failed to download sentora core from Github"
       echo "If you quit now, you can run again the installer later."
       read -e -p "Press r to retry or q to quit the installer? " resp
       case $resp in
           [Rr]* ) continue;;
           [Qq]* ) exit 3;;
       esac
   fi
done
mkdir -p $PANEL_PATH
chown -R root:root $PANEL_PATH
unzip -oq sentora_core.zip -d $PANEL_PATH
mv "$PANEL_PATH/sentora-core-$SENTORA_CORE_VERSION" "$PANEL_PATH/panel"
rm sentora_core.zip
rm "$PANEL_PATH/panel/LICENSE.md" "$PANEL_PATH/panel/README.md" "$PANEL_PATH/panel/.gitignore"
rm -rf "$PANEL_PATH/_delete_me" "$PANEL_PATH/.gitignore"

# Temp patch
wget -O hotfix_controller.ext.php "https://raw.githubusercontent.com/sentora/sentora-core/b176df0e29e52e14d778ca6cb47c5765cf3c4953/modules/ftp_management/code/controller.ext.php"
mv /etc/sentora/panel/modules/ftp_management/code/controller.ext.php controller.ext.php_backup
mv hotfix_controller.ext.php /etc/sentora/panel/modules/ftp_management/code/controller.ext.php
chown root:root /etc/sentora/panel/modules/ftp_management/code/controller.ext.php
chmod 777 /etc/sentora/panel/modules/ftp_management/code/controller.ext.php


#--- Set-up Sentora directories and configure permissions
PANEL_CONF="$PANEL_PATH/configs"

mkdir -p $PANEL_CONF
mkdir -p $PANEL_PATH/docs
chmod -R 777 $PANEL_PATH

mkdir -p $PANEL_DATA/backups
chmod -R 777 $PANEL_DATA/

# Links for compatibility with zpanel access
ln -s $PANEL_PATH /etc/zpanel
ln -s $PANEL_DATA /var/zpanel

#--- Prepare Sentora executables
chmod +x $PANEL_PATH/panel/bin/zppy
ln -s $PANEL_PATH/panel/bin/zppy /usr/bin/zppy

chmod +x $PANEL_PATH/panel/bin/setso
ln -s $PANEL_PATH/panel/bin/setso /usr/bin/setso

chmod +x $PANEL_PATH/panel/bin/setzadmin
ln -s $PANEL_PATH/panel/bin/setzadmin /usr/bin/setzadmin

#--- Install preconfig
while true; do
   wget -nv -O sentora_preconfig.zip https://github.com/sentora/sentora-installers/archive/$SENTORA_PRECONF_VERSION.zip
   if [[ -f sentora_preconfig.zip ]]; then
       break;
   else
       echo "Failed to download sentora preconfig from Github"
       echo "If you quit now, you can run again the installer later."
       read -e -p "Press r to retry or q to quit the installer? " resp
       case $resp in
           [Rr]* ) continue;;
           [Qq]* ) exit 3;;
       esac
   fi
done

unzip -oq sentora_preconfig.zip
cp -rf sentora-installers-$SENTORA_PRECONF_VERSION/preconf/* $PANEL_CONF
rm sentora_preconfig*
rm -rf sentora-*

#--- Prepare zsudo
cc -o $PANEL_PATH/panel/bin/zsudo $PANEL_CONF/bin/zsudo.c
sudo chown root $PANEL_PATH/panel/bin/zsudo
chmod +s $PANEL_PATH/panel/bin/zsudo

#--- Resolv.conf protect
chattr +i /etc/resolv.conf

#--- Prepare hostname
old_hostname=$(cat /etc/hostname)
# In file hostname
echo "$PANEL_FQDN" > /etc/hostname

# In file hosts
sed -i "/127.0.1.1[\t ]*$old_hostname/d" /etc/hosts
sed -i "s|$old_hostname|$PANEL_FQDN|" /etc/hosts

# For current session
hostname "$PANEL_FQDN"

# In network file
if [[ "$OS" = "CentOs" && "$VER" = "6" ]]; then
   sed -i "s|^\(HOSTNAME=\).*\$|HOSTNAME=$PANEL_FQDN|" /etc/sysconfig/network
   /etc/init.d/network restart
fi

#--- Some functions used many times below
# Random password generator function
passwordgen() {
   l=$1
   [ "$l" == "" ] && l=16
   tr -dc A-Za-z0-9 < /dev/urandom | head -c ${l} | xargs
}

# Add first parameter in hosts file as local IP domain
add_local_domain() {
   if ! grep -q "127.0.0.1 $1" /etc/hosts; then
       echo "127.0.0.1 $1" >> /etc/hosts;
   fi
}

#-----------------------------------------------------------
# Install all softwares and dependencies required by Sentora.

if [[ "$OS" = "Ubuntu" ]]; then
   # Disable the DPKG prompts before we run the software install to enable fully automated install.
   export DEBIAN_FRONTEND=noninteractive
fi

#--- MySQL
echo -e "\n-- Installing MySQL"
mysqlpassword=$(passwordgen);
$PACKAGE_INSTALLER "$DB_PCKG"
if [[ "$OS" = "CentOs" || "$OS" = "Fedora" ]]; then
   $PACKAGE_INSTALLER "$DB_PCKG-devel" "$DB_PCKG-server"
   MY_CNF_PATH="/etc/my.cnf"
   if  [[ "$VER" != "6" ]]; then
       DB_SERVICE="mariadb"
   else
       DB_SERVICE="mysqld"
   fi
elif [[ "$OS" = "Ubuntu" ]]; then
   $PACKAGE_INSTALLER bsdutils libsasl2-modules-sql libsasl2-modules
   if [ "$VER" = "12.04" ]; then
       $PACKAGE_INSTALLER db4.7-util
   fi
   MY_CNF_PATH="/etc/mysql/my.cnf"
   DB_SERVICE="mysql"
fi

service $DB_SERVICE start

# setup mysql root password
mysqladmin -u root password "$mysqlpassword"

# small cleaning of mysql access
mysql -u root -p"$mysqlpassword" -e "DELETE FROM mysql.user WHERE User='root' AND Host != 'localhost'";
mysql -u root -p"$mysqlpassword" -e "DELETE FROM mysql.user WHERE User=''";
mysql -u root -p"$mysqlpassword" -e "FLUSH PRIVILEGES";

# remove test table that is no longer used
mysql -u root -p"$mysqlpassword" -e "DROP DATABASE IF EXISTS test";

# secure SELECT "hacker-code" INTO OUTFILE
sed -i "s|\[mysqld\]|&\nsecure-file-priv = /var/tmp|" $MY_CNF_PATH

# setup sentora access and core database
sed -i "s|YOUR_ROOT_MYSQL_PASSWORD|$mysqlpassword|" $PANEL_PATH/panel/cnf/db.php
mysql -u root -p"$mysqlpassword" < $PANEL_CONF/sentora-install/sql/sentora_core.sql

# Register mysql/mariadb service for autostart
if [[ "$OS" = "CentOs" || "$OS" = "Fedora" ]]; then
   if [[ "$VER" != "6" ]]; then
       systemctl enable "$DB_SERVICE".service
   else
       chkconfig "$DB_SERVICE" on
   fi
fi


#--- Postfix
echo -e "\n-- Installing Postfix"
if [[ "$OS" = "CentOs"  || "$OS" = "Fedora" ]]; then
   $PACKAGE_INSTALLER postfix postfix-perl-scripts postfix-mysql  # Fedora need postfix-mysql, don't think install it for CentOs is a error.
   USR_LIB_PATH="/usr/libexec"
elif [[ "$OS" = "Ubuntu" ]]; then
   $PACKAGE_INSTALLER postfix postfix-mysql
   USR_LIB_PATH="/usr/lib"
fi

postfixpassword=$(passwordgen);
mysql -u root -p"$mysqlpassword" < $PANEL_CONF/sentora-install/sql/sentora_postfix.sql
mysql -u root -p"$mysqlpassword" -e "UPDATE mysql.user SET Password=PASSWORD('$postfixpassword') WHERE User='postfix' AND Host='localhost';";

mkdir $PANEL_DATA/vmail
useradd -r -g mail -d $PANEL_DATA/vmail -s /sbin/nologin -c "Virtual maildir" vmail
chown -R vmail:mail $PANEL_DATA/vmail
chmod -R 770 $PANEL_DATA/vmail

mkdir -p /var/spool/vacation
useradd -r -d /var/spool/vacation -s /sbin/nologin -c "Virtual vacation" vacation
chown -R vacation:vacation /var/spool/vacation
chmod -R 770 /var/spool/vacation

#Removed
optionnal transport that was leaved empty, until it is fully handled.
#ln
-s $PANEL_CONF/postfix/transport /etc/postfix/transport
#postmap
/etc/postfix/transport

add_local_domain "$PANEL_FQDN"
add_local_domain "autoreply.$PANEL_FQDN"

rm -rf /etc/postfix/main.cf /etc/postfix/master.cf
ln -s $PANEL_CONF/postfix/master.cf /etc/postfix/master.cf
ln -s $PANEL_CONF/postfix/main.cf /etc/postfix/main.cf
ln -s $PANEL_CONF/postfix/vacation.pl /var/spool/vacation/vacation.pl

sed -i "s|!POSTFIX_PASSWORD!|$postfixpassword|" $PANEL_CONF/postfix/*.cf
sed -i "s|!POSTFIX_PASSWORD!|$postfixpassword|" $PANEL_CONF/postfix/vacation.conf
sed -i "s|!PANEL_FQDN!|$PANEL_FQDN|" $PANEL_CONF/postfix/main.cf

sed -i "s|!USR_LIB!|$USR_LIB_PATH|" $PANEL_CONF/postfix/master.cf
sed -i "s|!USR_LIB!|$USR_LIB_PATH|" $PANEL_CONF/postfix/main.cf
sed -i "s|!SERVER_IP!|$PUBLIC_IP|" $PANEL_CONF/postfix/main.cf

VMAIL_UID=$(id -u vmail)
MAIL_GID=$(sed -nr "s/^mail:x:([0-9]+):.*/\1/p" /etc/group)
sed -i "s|!POS_UID!|$VMAIL_UID|" $PANEL_CONF/postfix/main.cf
sed -i "s|!POS_GID!|$MAIL_GID|" $PANEL_CONF/postfix/main.cf

# remove unusued directives that issue warnings
sed -i '/virtual_mailbox_limit_maps/d' $PANEL_CONF/postfix/main.cf
sed -i '/smtpd_bind_address/d' $PANEL_CONF/postfix/master.cf

# Register postfix service for autostart (it is automatically started)
if [[ "$OS" = "CentOs" || "$OS" = "Fedora" ]]; then
   if [[ "$VER" != "6" ]]; then
       systemctl enable postfix.service
       # systemctl start postfix.service
   else
       chkconfig postfix on
       # /etc/init.d/postfix start
   fi
fi


#--- Dovecot (includes Sieve)
echo -e "\n-- Installing Dovecot"
if [[ "$OS" = "CentOs" || "$OS" = "Fedora" ]]; then
   $PACKAGE_INSTALLER dovecot dovecot-mysql dovecot-pigeonhole
   sed -i "s|
#first_valid_uid
= ?|first_valid_uid = $VMAIL_UID\n
#last_valid_uid
= $VMAIL_UID\n\nfirst_valid_gid = $MAIL_GID\n
#last_valid_gid
= $MAIL_GID|" $PANEL_CONF/dovecot2/dovecot.conf
elif [[ "$OS" = "Ubuntu" ]]; then
   $PACKAGE_INSTALLER dovecot-mysql dovecot-imapd dovecot-pop3d dovecot-common dovecot-managesieved dovecot-lmtpd
   sed -i "s|
#first_valid_uid
= ?|first_valid_uid = $VMAIL_UID\nlast_valid_uid = $VMAIL_UID\n\nfirst_valid_gid = $MAIL_GID\nlast_valid_gid = $MAIL_GID|" $PANEL_CONF/dovecot2/dovecot.conf
fi

mkdir -p $PANEL_DATA/sieve
chown -R vmail:mail $PANEL_DATA/sieve
mkdir -p /var/lib/dovecot/sieve/
touch /var/lib/dovecot/sieve/default.sieve
ln -s $PANEL_CONF/dovecot2/globalfilter.sieve $PANEL_DATA/sieve/globalfilter.sieve

rm -rf /etc/dovecot/dovecot.conf
ln -s $PANEL_CONF/dovecot2/dovecot.conf /etc/dovecot/dovecot.conf
sed -i "s|!POSTMASTER_EMAIL!|postmaster@$PANEL_FQDN|" $PANEL_CONF/dovecot2/dovecot.conf
sed -i "s|!POSTFIX_PASSWORD!|$postfixpassword|" $PANEL_CONF/dovecot2/dovecot-dict-quota.conf
sed -i "s|!POSTFIX_PASSWORD!|$postfixpassword|" $PANEL_CONF/dovecot2/dovecot-mysql.conf
sed -i "s|!DOV_UID!|$VMAIL_UID|" $PANEL_CONF/dovecot2/dovecot-mysql.conf
sed -i "s|!DOV_GID!|$MAIL_GID|" $PANEL_CONF/dovecot2/dovecot-mysql.conf

touch /var/log/dovecot.log /var/log/dovecot-info.log /var/log/dovecot-debug.log
chown vmail:mail /var/log/dovecot*
chmod 660 /var/log/dovecot*

# Register dovecot service for autostart and start it
if [[ "$OS" = "CentOs" || "$OS" = "Fedora" ]]; then
   if [[ "$VER" != "6" ]]; then
       systemctl enable dovecot.service
       systemctl start dovecot.service
   else
       chkconfig dovecot on
       /etc/init.d/dovecot start
   fi
fi

#--- Apache server
echo -e "\n-- Installing and configuring Apache"
$PACKAGE_INSTALLER "$HTTP_PCKG"
if [[ "$OS" = "CentOs" || "$OS" = "Fedora" ]]; then
   $PACKAGE_INSTALLER "$HTTP_PCKG-devel"
   HTTP_CONF_PATH="/etc/httpd/conf/httpd.conf"
   HTTP_VARS_PATH="/etc/sysconfig/httpd"
   HTTP_SERVICE="httpd"
   HTTP_USER="apache"
   HTTP_GROUP="apache"
   if [[ "$VER" != "6" ]]; then
       # Disable extra modules in centos 7 and Fedora
       disable_file /etc/httpd/conf.modules.d/01-cgi.conf
       disable_file /etc/httpd/conf.modules.d/00-lua.conf
       disable_file /etc/httpd/conf.modules.d/00-dav.conf
   else
       disable_file /etc/httpd/conf.d/welcome.conf
       disable_file /etc/httpd/conf.d/webalizer.conf
       # Disable more extra modules in centos 6.x /etc/httpd/httpd.conf dav/ldap/cgi/proxy_ajp
           sed -i "s|LoadModule suexec_module modules|
#LoadModule
suexec_module modules|" "$HTTP_CONF_PATH"
           sed -i "s|LoadModule cgi_module modules|
#LoadModule
cgi_module modules|" "$HTTP_CONF_PATH"
           sed -i "s|LoadModule dav_module modules|
#LoadModule
dav_module modules|" "$HTTP_CONF_PATH"
           sed -i "s|LoadModule dav_fs_module modules|
#LoadModule
dav_fs_module modules|" "$HTTP_CONF_PATH"
           sed -i "s|LoadModule proxy_ajp_module modules|
#LoadModule
proxy_ajp_module modules|" "$HTTP_CONF_PATH"
   fi

elif [[ "$OS" = "Ubuntu" ]]; then
   $PACKAGE_INSTALLER libapache2-mod-bw
   HTTP_CONF_PATH="/etc/apache2/apache2.conf"
   HTTP_VARS_PATH="/etc/apache2/envvars"
   HTTP_SERVICE="apache2"
   HTTP_USER="www-data"
   HTTP_GROUP="www-data"
   a2enmod rewrite
fi

if ! grep -q "Include $PANEL_CONF/apache/httpd.conf" "$HTTP_CONF_PATH"; then
   echo "Include $PANEL_CONF/apache/httpd.conf" >> "$HTTP_CONF_PATH";
fi
add_local_domain "$(hostname)"

if ! grep -q "apache ALL=NOPASSWD: $PANEL_PATH/panel/bin/zsudo" /etc/sudoers; then
   echo "apache ALL=NOPASSWD: $PANEL_PATH/panel/bin/zsudo" >> /etc/sudoers;
fi

# Create root directory for public HTTP docs
mkdir -p $PANEL_DATA/hostdata/zadmin/public_html
chown -R $HTTP_USER:$HTTP_GROUP $PANEL_DATA/hostdata/
chmod -R 770 $PANEL_DATA/hostdata/

mysql -u root -p"$mysqlpassword" -e "UPDATE sentora_core.x_settings SET so_value_tx='$HTTP_SERVICE' WHERE so_name_vc='httpd_exe'"
mysql -u root -p"$mysqlpassword" -e "UPDATE sentora_core.x_settings SET so_value_tx='$HTTP_SERVICE' WHERE so_name_vc='apache_sn'"

#Set
keepalive on (default is off)
sed -i "s|KeepAlive Off|KeepAlive On|" "$HTTP_CONF_PATH"

# Permissions fix for Apache and ProFTPD (to enable them to play nicely together!)
if ! grep -q "umask 002" "$HTTP_VARS_PATH"; then
   echo "umask 002" >> "$HTTP_VARS_PATH";
fi

# remove default virtual site to ensure Sentora is the default vhost
if [[ "$OS" = "CentOs" || "$OS" = "Fedora" ]]; then
   sed -i "s|DocumentRoot \"/var/www/html\"|DocumentRoot $PANEL_PATH/panel|" "$HTTP_CONF_PATH"
elif [[ "$OS" = "Ubuntu" ]]; then
   # disable completely sites-enabled/000-default.conf
   if [[ "$VER" = "14.04" ]]; then
       sed -i "s|IncludeOptional sites-enabled|#&|" "$HTTP_CONF_PATH"
   else
       sed -i "s|Include sites-enabled|#&|" "$HTTP_CONF_PATH"
   fi
fi

# Comment "NameVirtualHost" and Listen directives that are handled in vhosts file
if [[ "$OS" = "CentOs" || "$OS" = "Fedora" ]]; then
   sed -i "s|^\(NameVirtualHost .*$\)|#\1\n# NameVirtualHost is now handled in Sentora vhosts file|" "$HTTP_CONF_PATH"
   sed -i 's|^\(Listen .*$\)|#\1\n# Listen is now handled in Sentora vhosts file|' "$HTTP_CONF_PATH"
elif [[ "$OS" = "Ubuntu" ]]; then
   sed -i "s|\(Include ports.conf\)|#\1\n# Ports are now handled in Sentora vhosts file|" "$HTTP_CONF_PATH"
   disable_file /etc/apache2/ports.conf
fi

# adjustments for apache 2.4
if [[ ("$OS" = "CentOs" && "$VER" = "7") ||
     ("$OS" = "Fedora") ||
     ("$OS" = "Ubuntu" && "$VER" = "14.04") ]] ; then
   # Order deny,allow / Deny from all   ->  Require all denied
   sed -i 's|Order deny,allow|Require all denied|I'  $PANEL_CONF/apache/httpd.conf
   sed -i '/Deny from all/d' $PANEL_CONF/apache/httpd.conf

   # Order allow,deny / Allow from all  ->  Require all granted
   sed -i 's|Order allow,deny|Require all granted|I' $PANEL_CONF/apache/httpd-vhosts.conf
   sed -i '/Allow from all/d' $PANEL_CONF/apache/httpd-vhosts.conf

   sed -i 's|Order allow,deny|Require all granted|I'  $PANEL_PATH/panel/modules/apache_admin/hooks/OnDaemonRun.hook.php
   sed -i '/Allow from all/d' $PANEL_PATH/panel/modules/apache_admin/hooks/OnDaemonRun.hook.php

   # Remove NameVirtualHost that is now without effect and generate warning
   sed -i '/NameVirtualHost/{N;d}' $PANEL_CONF/apache/httpd-vhosts.conf
   sed -i '/# NameVirtualHost is/ {N;N;N;N;N;d}' $PANEL_PATH/panel/modules/apache_admin/hooks/OnDaemonRun.hook.php

   # Options must have ALL (or none) +/- prefix, disable listing directories
   sed -i 's| FollowSymLinks [-]Indexes| +FollowSymLinks -Indexes|' $PANEL_PATH/panel/modules/apache_admin/hooks/OnDaemonRun.hook.php
fi


#--- PHP
echo -e "\n-- Installing and configuring PHP"
if [[ "$OS" = "CentOs" ||"$OS" = "Fedora" ]]; then
   $PACKAGE_INSTALLER php php-devel php-gd php-mbstring php-intl php-mysql php-xml php-xmlrpc
   $PACKAGE_INSTALLER php-mcrypt php-imap  
#Epel
packages
   PHP_INI_PATH="/etc/php.ini"
   PHP_EXT_PATH="/etc/php.d"
elif [[ "$OS" = "Ubuntu" ]]; then
   $PACKAGE_INSTALLER libapache2-mod-php5 php5-common php5-cli php5-mysql php5-gd php5-mcrypt php5-curl php-pear php5-imap php5-xmlrpc php5-xsl php5-intl
   if [ "$VER" = "14.04" ]; then
       php5enmod mcrypt  # missing in the package for Ubuntu 14!
   else
       $PACKAGE_INSTALLER php5-suhosin
   fi
   PHP_INI_PATH="/etc/php5/apache2/php.ini"
fi
# Setup php upload dir
mkdir -p $PANEL_DATA/temp
chmod 1777 $PANEL_DATA/temp/
chown -R $HTTP_USER:$HTTP_GROUP $PANEL_DATA/temp/

# Setup php session save directory
mkdir "$PANEL_DATA/sessions"
chown $HTTP_USER:$HTTP_GROUP "$PANEL_DATA/sessions"
chmod 733 "$PANEL_DATA/sessions"
chmod +t "$PANEL_DATA/sessions"

if [[ "$OS" = "CentOs" || "$OS" = "Fedora" ]]; then
   # Remove session & php values from apache that cause override
   sed -i "/php_value/d" /etc/httpd/conf.d/php.conf
elif [[ "$OS" = "Ubuntu" ]]; then
   sed -i "s|;session.save_path = \"/var/lib/php5\"|session.save_path = \"$PANEL_DATA/sessions\"|" $PHP_INI_PATH
fi
sed -i "/php_value/d" $PHP_INI_PATH
echo "session.save_path = $PANEL_DATA/sessions;">> $PHP_INI_PATH

# setup timezone and upload temp dir
sed -i "s|;date.timezone =|date.timezone = $tz|" $PHP_INI_PATH
sed -i "s|;upload_tmp_dir =|upload_tmp_dir = $PANEL_DATA/temp/|" $PHP_INI_PATH

# Disable php signature in headers to hide it from hackers
sed -i "s|expose_php = On|expose_php = Off|" $PHP_INI_PATH

# Build suhosin for PHP 5.x which is required by Sentora.
if [[ "$OS" = "CentOs" || "$OS" = "Fedora" || ( "$OS" = "Ubuntu" && "$VER" = "14.04") ]] ; then
   echo -e "\n# Building suhosin"
   if [[ "$OS" = "Ubuntu" ]]; then
       $PACKAGE_INSTALLER php5-dev
   fi
   SUHOSIN_VERSION="0.9.37.1"
   wget -nv -O suhosin.zip https://github.com/stefanesser/suhosin/archive/$SUHOSIN_VERSION.zip
   unzip -q suhosin.zip
   rm -f suhosin.zip
   cd suhosin-$SUHOSIN_VERSION
   phpize &> /dev/null
   ./configure &> /dev/null
   make &> /dev/null
   make install
   cd ..
   rm -rf suhosin-$SUHOSIN_VERSION
   if [[ "$OS" = "CentOs" ]]; then
       echo 'extension=suhosin.so' > $PHP_EXT_PATH/suhosin.ini
   elif [[ "$OS" = "Ubuntu" ]]; then
       sed -i 'N;/default extension directory./a\extension=suhosin.so' $PHP_INI_PATH
   fi
fi

# Register apache(+php) service for autostart and start it
if [[ "$OS" = "CentOs" || "$OS" = "Fedora" ]]; then
   if [[ "$VER" == "6" ]]; then
chkconfig "$HTTP_SERVICE" on
       "/etc/init.d/$HTTP_SERVICE" start
   else
       systemctl enable "$HTTP_SERVICE.service"
       systemctl start "$HTTP_SERVICE.service"
   fi
fi


#--- ProFTPd
echo -e "\n-- Installing ProFTPD"
if [[ "$OS" = "CentOs" || "$OS" = "Fedora" ]]; then
   $PACKAGE_INSTALLER proftpd proftpd-mysql
   FTP_CONF_PATH='/etc/proftpd.conf'
   sed -i "s|nogroup|nobody|" $PANEL_CONF/proftpd/proftpd-mysql.conf
elif [[ "$OS" = "Ubuntu" ]]; then
   $PACKAGE_INSTALLER proftpd-mod-mysql
   FTP_CONF_PATH='/etc/proftpd/proftpd.conf'
fi

# Create and init proftpd database
mysql -u root -p"$mysqlpassword" < $PANEL_CONF/sentora-install/sql/sentora_proftpd.sql

# Create and configure mysql password for proftpd
proftpdpassword=$(passwordgen);
sed -i "s|!SQL_PASSWORD!|$proftpdpassword|" $PANEL_CONF/proftpd/proftpd-mysql.conf
mysql -u root -p"$mysqlpassword" -e "UPDATE mysql.user SET Password=PASSWORD('$proftpdpassword') WHERE User='proftpd' AND Host='localhost'";

# Assign httpd user and group to all users that will be created
HTTP_UID=$(id -u "$HTTP_USER")
HTTP_GID=$(sed -nr "s/^$HTTP_GROUP:x:([0-9]+):.*/\1/p" /etc/group)
mysql -u root -p"$mysqlpassword" -e "ALTER TABLE sentora_proftpd.ftpuser ALTER COLUMN uid SET DEFAULT $HTTP_UID"
mysql -u root -p"$mysqlpassword" -e "ALTER TABLE sentora_proftpd.ftpuser ALTER COLUMN gid SET DEFAULT $HTTP_GID"
sed -i "s|!SQL_MIN_ID!|$HTTP_UID|" $PANEL_CONF/proftpd/proftpd-mysql.conf

# Setup proftpd base file to call sentora config
rm -f "$FTP_CONF_PATH"
#touch
"$FTP_CONF_PATH"
#echo
"include $PANEL_CONF/proftpd/proftpd-mysql.conf" >> "$FTP_CONF_PATH";
ln -s "$PANEL_CONF/proftpd/proftpd-mysql.conf" "$FTP_CONF_PATH"

# setup proftpd log dir
mkdir -p $PANEL_DATA/logs/proftpd
chmod -R 644 $PANEL_DATA/logs/proftpd

# Correct bug from package in Ubutu14.04 which screw service proftpd restart
# see https://bugs.launchpad.net/ubuntu/+source/proftpd-dfsg/+bug/1246245
if [[ "$OS" = "Ubuntu" && "$VER" = "14.04" ]]; then
  sed -i 's|\([ \t]*start-stop-daemon --stop --signal $SIGNAL \)\(--quiet --pidfile "$PIDFILE"\)$|\1--retry 1 \2|' /etc/init.d/proftpd
fi

# Register proftpd service for autostart and start it
if [[ "$OS" = "CentOs" || "$OS" = "Fedora" ]]; then
   if [[ "$VER" != "6" ]]; then
   systemctl enable proftpd.service
       systemctl start proftpd.service
   else
   chkconfig proftpd on
       /etc/init.d/proftpd start
   fi
fi

#--- BIND
echo -e "\n-- Installing and configuring Bind"

if [[ "$OS" = "CentOs" || "$OS" = "Fedora" ]]; then
   $PACKAGE_INSTALLER bind bind-utils bind-libs
   BIND_PATH="/etc/named/"
   BIND_FILES="/etc"
   BIND_SERVICE="named"
   BIND_USER="named"
elif [[ "$OS" = "Ubuntu" ]]; then
   $PACKAGE_INSTALLER bind9 bind9utils
   BIND_PATH="/etc/bind/"
   BIND_FILES="/etc/bind"
   BIND_SERVICE="bind9"
   BIND_USER="bind"
   mysql -u root -p"$mysqlpassword" -e "UPDATE sentora_core.x_settings SET so_value_tx='' WHERE so_name_vc='bind_log'"
fi

mysql -u root -p"$mysqlpassword" -e "UPDATE sentora_core.x_settings SET so_value_tx='$BIND_PATH' WHERE so_name_vc='bind_dir'"
mysql -u root -p"$mysqlpassword" -e "UPDATE sentora_core.x_settings SET so_value_tx='$BIND_SERVICE' WHERE so_name_vc='bind_service'"
chmod -R 777 $PANEL_CONF/bind/zones/

# Setup logging directory
mkdir $PANEL_DATA/logs/bind
touch $PANEL_DATA/logs/bind/bind.log $PANEL_DATA/logs/bind/debug.log
chown $BIND_USER $PANEL_DATA/logs/bind/bind.log $PANEL_DATA/logs/bind/debug.log
chmod 660 $PANEL_DATA/logs/bind/bind.log $PANEL_DATA/logs/bind/debug.log

if [[ "$OS" = "CentOs" || "$OS" = "Fedora" ]]; then
   chmod 751 /var/named
   chmod 771 /var/named/data
   sed -i 's|bind/zones.rfc1918|named.rfc1912.zones|' $PANEL_CONF/bind/named.conf
elif [[ "$OS" = "Ubuntu" ]]; then
   mkdir -p /var/named/dynamic
   touch /var/named/dynamic/managed-keys.bind
   chown -R bind:bind /var/named/
   chmod -R 777 $PANEL_CONF/bind/etc

   chown root:root $BIND_FILES/rndc.key
   chmod 755 $BIND_FILES/rndc.key
fi
# Some link to enable call from path
ln -s /usr/sbin/named-checkconf /usr/bin/named-checkconf
ln -s /usr/sbin/named-checkzone /usr/bin/named-checkzone
ln -s /usr/sbin/named-compilezone /usr/bin/named-compilezone

# Setup acl IP to forbid zone transfer
sed -i "s|!SERVER_IP!|$PUBLIC_IP|" $PANEL_CONF/bind/named.conf

# Build key and conf files
rm -rf $BIND_FILES/named.conf $BIND_FILES/rndc.conf $BIND_FILES/rndc.key
rndc-confgen -a -r /dev/urandom
cat $BIND_FILES/rndc.key $PANEL_CONF/bind/named.conf > $BIND_FILES/named.conf
cat $BIND_FILES/rndc.key $PANEL_CONF/bind/rndc.conf > $BIND_FILES/rndc.conf
rm -f $BIND_FILES/rndc.key

# Register Bind service for autostart and start it
if [[ "$OS" = "CentOs" || "$OS" = "Fedora" ]]; then
   if [[ "$VER" != "6" ]]; then
systemctl enable named.service
       systemctl start named.service
   else
chkconfig named on
       /etc/init.d/named start
   fi
fi

#--- CRON and ATD

echo -e "\n-- Installing and configuring cron tasks"
if [[ "$OS" = "CentOs" || "$OS" = "Fedora" ]]; then
   
#cronie
& crontabs may be missing
   $PACKAGE_INSTALLER crontabs
   CRON_DIR="/var/spool/cron"
   CRON_SERVICE="crond"
elif [[ "$OS" = "Ubuntu" ]]; then
   CRON_DIR="/var/spool/cron/crontabs"
   CRON_SERVICE="cron"
fi

CRON_USER="$HTTP_USER"

# prepare daemon crontab
# sed -i "s|!USER!|$CRON_USER|" "$PANEL_CONF/cron/zdaemon"
#it
screw update search!#
sed -i "s|!USER!|root|" "$PANEL_CONF/cron/zdaemon"
cp "$PANEL_CONF/cron/zdaemon" /etc/cron.d/zdaemon
chmod 644 /etc/cron.d/zdaemon

# prepare user crontabs
CRON_FILE="$CRON_DIR/$CRON_USER"
mysql -u root -p"$mysqlpassword" -e "UPDATE sentora_core.x_settings SET so_value_tx='$CRON_FILE' WHERE so_name_vc='cron_file'"
mysql -u root -p"$mysqlpassword" -e "UPDATE sentora_core.x_settings SET so_value_tx='$CRON_FILE' WHERE so_name_vc='cron_reload_path'"
mysql -u root -p"$mysqlpassword" -e "UPDATE sentora_core.x_settings SET so_value_tx='$CRON_USER' WHERE so_name_vc='cron_reload_user'"
{
   echo "SHELL=/bin/bash"
   echo "PATH=/sbin:/bin:/usr/sbin:/usr/bin"
   echo ""
} > mycron
crontab -u $HTTP_USER mycron
rm -f mycron

chmod 744 "$CRON_DIR"
chown -R $HTTP_USER:$HTTP_USER "$CRON_DIR"
chmod 644 "$CRON_FILE"

# Register cron and atd services for autostart and start them
if [[ "$OS" = "CentOs" || "$OS" = "Fedora" ]]; then
   if [[ "$VER" != "6" ]]; then
systemctl enable crond.service
       systemctl start crond.service
       systemctl start atd.service
   else
   chkconfig crond on
       /etc/init.d/crond start
       /etc/init.d/atd start
   fi
fi


#--- phpMyAdmin
echo -e "\n-- Configuring phpMyAdmin"
phpmyadminsecret=$(passwordgen);
chmod 644 $PANEL_CONF/phpmyadmin/config.inc.php
sed -i "s|\$cfg\['blowfish_secret'\] \= 'SENTORA';|\$cfg\['blowfish_secret'\] \= '$phpmyadminsecret';|" $PANEL_CONF/phpmyadmin/config.inc.php
ln -s $PANEL_CONF/phpmyadmin/config.inc.php $PANEL_PATH/panel/etc/apps/phpmyadmin/config.inc.php
# Remove phpMyAdmin's setup folder in case it was left behind
rm -rf $PANEL_PATH/panel/etc/apps/phpmyadmin/setup


#--- Roundcube
echo -e "\n-- Configuring Roundcube"

# Import roundcube default table
mysql -u root -p"$mysqlpassword" < $PANEL_CONF/sentora-install/sql/sentora_roundcube.sql

# Create and configure mysql password for roundcube
roundcubepassword=$(passwordgen);
sed -i "s|!ROUNDCUBE_PASSWORD!|$roundcubepassword|" $PANEL_CONF/roundcube/roundcube_config.inc.php
mysql -u root -p"$mysqlpassword" -e "UPDATE mysql.user SET Password=PASSWORD('$roundcubepassword') WHERE User='roundcube' AND Host='localhost'";

# Create and configure des key
roundcube_des_key=$(passwordgen 24);
sed -i "s|!ROUNDCUBE_DESKEY!|$roundcube_des_key|" $PANEL_CONF/roundcube/roundcube_config.inc.php

# Create and configure specials directories and rights
chown "$HTTP_USER:$HTTP_GROUP" "$PANEL_PATH/panel/etc/apps/webmail/temp"
mkdir "$PANEL_DATA/logs/roundcube"
chown "$HTTP_USER:$HTTP_GROUP" "$PANEL_DATA/logs/roundcube"

# Map config file in roundcube with symbolic links
ln -s $PANEL_CONF/roundcube/roundcube_config.inc.php $PANEL_PATH/panel/etc/apps/webmail/config/config.inc.php
ln -s $PANEL_CONF/roundcube/sieve_config.inc.php $PANEL_PATH/panel/etc/apps/webmail/plugins/managesieve/config.inc.php


#--- Webalizer
echo -e "\n-- Configuring Webalizer"
$PACKAGE_INSTALLER webalizer
if [[ "$OS" = "CentOs" ]]; then
   rm -rf /etc/webalizer.conf
elif [[ "$OS" = "Ubuntu" ]]; then
   rm -rf /etc/webalizer/webalizer.conf
fi


#--- Set some Sentora database entries using. setso and setzadmin (require PHP)
echo -e "\n-- Configuring Sentora"
zadminpassword=$(passwordgen);
setzadmin --set "$zadminpassword";
$PANEL_PATH/panel/bin/setso --set sentora_domain "$PANEL_FQDN"
$PANEL_PATH/panel/bin/setso --set server_ip "$PUBLIC_IP"

# if not release, set beta version in database
if [[ $(echo "$SENTORA_CORE_VERSION" | sed  's|.*-\(beta\).*$|\1|') = "beta"  ]] ; then
   $PANEL_PATH/panel/bin/setso --set dbversion "$SENTORA_CORE_VERSION"
fi

# make the daemon to build vhosts file.
$PANEL_PATH/panel/bin/setso --set apache_changed "true"
php -q $PANEL_PATH/panel/bin/daemon.php


#--- Firewall ?

#--- Resolv.conf deprotect
chattr -i /etc/resolv.conf


#--- Restart all services to capture output messages, if any
if [[ "$OS" = "CentOs" && "$VER" == "7" || "$OS" = "Fedora" ]]; then
   # CentOs7 does not return anything except redirection to systemctl :-(
   service() {
      echo "Restarting $1"
      systemctl restart "$1.service"
   }
fi

service "$DB_SERVICE" restart
service "$HTTP_SERVICE" restart
service postfix restart
service dovecot restart
service "$CRON_SERVICE" restart
service "$BIND_SERVICE" restart
service proftpd restart
service atd restart

#--- Store the passwords for user reference
{
   echo "Server IP address : $PUBLIC_IP"
   echo "Panel URL         : http://$PANEL_FQDN"
   echo "zadmin Password   : $zadminpassword"
   echo ""
   echo "MySQL Root Password      : $mysqlpassword"
   echo "MySQL Postfix Password   : $postfixpassword"
   echo "MySQL ProFTPd Password   : $proftpdpassword"
   echo "MySQL Roundcube Password : $roundcubepassword"
} >> /root/passwords.txt

#--- Advise the admin that Sentora is now installed and accessible.
{
echo "########################################################"
echo " Congratulations Sentora has now been installed on your"
echo " server. Please review the log file left in /root/ for "
echo " any errors encountered during installation."
echo ""
echo " Login to Sentora at http://$PANEL_FQDN"
echo " Sentora Username  : zadmin"
echo " Sentora Password  : $zadminpassword"
echo ""
echo " MySQL Root Password      : $mysqlpassword"
echo " MySQL Postfix Password   : $postfixpassword"
echo " MySQL ProFTPd Password   : $proftpdpassword"
echo " MySQL Roundcube Password : $roundcubepassword"
echo "   (theses passwords are saved in /root/passwords.txt)"
echo "########################################################"
echo ""
} &>/dev/tty

# Wait until the user have read before restarts the server...
if [[ "$INSTALL" != "auto" ]] ; then
   while true; do
       read -e -p "Restart your server now to complete the install (y/n)? " rsn
       case $rsn in
           [Yy]* ) break;;
           [Nn]* ) exit;
       esac
   done
   shutdown -r now
fi

--------------------------------------------------------
Reply
Thanks given by:
#5
RE: New Fedora 24 Installation ... incomming
You should post it on a git.
No support using PM (Auto adding to IGNORE list!), use the forum. 
How to ask

200$ free to start your VPS 60 days credit
Reply
Thanks given by:
#6
RE: New Fedora 24 Installation ... incomming
Now on GitHub under sentora_install_fedora.sh
Reply
Thanks given by: TGates , Me.B
#7
RE: New Fedora 24 Installation ... incomming
Great will check it.

M B
No support using PM (Auto adding to IGNORE list!), use the forum. 
How to ask

200$ free to start your VPS 60 days credit
Reply
Thanks given by:


Possibly Related Threads…
Thread Author Replies Views Last Post
Payment Processor Installation Help Needed zHostingSolutions 1 6 ,335 06-25-2017, 01:16 AM
Last Post: TGates
Fedora Server 21 Support ? elftidus 0 4 ,475 12-15-2014, 07:28 AM
Last Post: elftidus
Pagekit Installation Failed carl.victor 3 12 ,539 11-07-2014, 04:58 AM
Last Post: TGates

Forum Jump:


Users browsing this thread: 1 Guest(s)