This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Ubuntu 14.04 | Install and Configure Postfix + Amavisd-new + ClamAV + Spamassassin
#1
Ubuntu 14.04 | Install and Configure Postfix + Amavisd-new + ClamAV + Spamassassin
Follow the directions in this link:
https://help.ubuntu.com/community/PostfixAmavisNew

I have confirmed that they work correctly.
Reply
Thanks given by: Cantalupo
#2
RE: Ubuntu 14.04 | Install and Configure Postfix + Amavisd-new + ClamAV + Spamassassin
I am not able to access Rounde Cube after following this....

Error: Failed to connect server storage
Reply
Thanks given by:
#3
RE: Ubuntu 14.04 | Install and Configure Postfix + Amavisd-new + ClamAV + Spamassassin
(03-27-2015, 03:21 PM)Good One Wrote: I am not able to access Rounde Cube after following this....

Error: Failed to connect server storage

Expose here the changes you made step by step, so we can help you.

M B
No support using PM (Auto adding to IGNORE list!), use the forum. 
How to ask
Freelance AWS Certified Architect & SysOps// DevOps

10$ free to start your VPS

Reply
Thanks given by:
#4
RE: Ubuntu 14.04 | Install and Configure Postfix + Amavisd-new + ClamAV + Spamassassin
(03-27-2015, 06:19 PM)Me.B Wrote:
(03-27-2015, 03:21 PM)Good One Wrote: I am not able to access Rounde Cube after following this....

Error: Failed to connect server storage

Expose here the changes you made step by step, so we can help you.

M B


I followed the guide from that given link above... Step by step... It was working ,


Code:
To begin, install (see InstallingSoftware) the following packages:

sudo apt-get install amavisd-new spamassassin clamav-daemon

Install the optional packages for better spam detection (who does not want better spam detection?):

sudo apt-get install libnet-dns-perl libmail-spf-query-perl pyzor razor

Note: Replace libmail-spf-query-perl with libmail-spf-perl

Install these optional packages to enable better scanning of attached archive files:

sudo apt-get install arj bzip2 cabextract cpio file gzip lha nomarch pax rar unrar unzip unzoo zip zoo

Configuration

Clamav

The default behaviour of Clamav will fit our needs. A daemon is launched (clamd) and signatures are fetched every day. For more Clamav configuration options, check the configuration files in /etc/clamav.

Add clamav user to the amavis group and vice versa in order for Clamav to have access to scan files:

sudo adduser clamav amavis
sudo adduser amavis clamav

Spamassassin

Spamasssassin autodetects optional components and will use them if they are present. This means that there is no need to configure dcc-client, pyzor and razor.

The fine tuning of Spamassassin rules is beyond the scope of this guide. Please refer to the Spamassassin page.

Edit /etc/default/spamassassin to activate the Spamassassin daemon change ENABLED=0 to:

ENABLED=1

and to enable automatic rule updates change CRON=0 at the bottom to:

CRON=1

Now start Spamassassin:

sudo /etc/init.d/spamassassin start

Amavis

First, activate spam and antivirus detection in Amavis by editing /etc/amavis/conf.d/15-content_filter_mode:

use strict;

# You can modify this file to re-enable SPAM checking through spamassassin
# and to re-enable antivirus checking.

#
# Default antivirus checking mode
# Uncomment the two lines below to enable it
#

@bypass_virus_checks_maps = (
  \%bypass_virus_checks, \@bypass_virus_checks_acl, \$bypass_virus_checks_re);


#
# Default SPAM checking mode
# Uncomment the two lines below to enable it
#

@bypass_spam_checks_maps = (
  \%bypass_spam_checks, \@bypass_spam_checks_acl, \$bypass_spam_checks_re);

1;  # insure a defined return

After configuration Amavis needs to be restarted:

sudo /etc/init.d/amavis restart

Postfix integration

For postfix integration, you need to add the content_filter configuration variable to the Postfix configuration file /etc/postfix/main.cf. This instructs postfix to pass messages to amavis at a given IP address and port:

content_filter = smtp-amavis:[127.0.0.1]:10024

The following postconf command, run as root because of the preceding sudo command, adds the content_filter specification line above to main.cf:

sudo postconf -e "content_filter = smtp-amavis:[127.0.0.1]:10024"

Alternatively, you can manually edit main.cf yourself to add the content_filter line.

Next edit /etc/postfix/master.cf and add the following to the end of the file:

smtp-amavis     unix    -       -       -       -       2       smtp
       -o smtp_data_done_timeout=1200
       -o smtp_send_xforward_command=yes
       -o disable_dns_lookups=yes
       -o max_use=20

127.0.0.1:10025 inet    n       -       -       -       -       smtpd
       -o content_filter=
       -o local_recipient_maps=
       -o relay_recipient_maps=
       -o smtpd_restriction_classes=
       -o smtpd_delay_reject=no
       -o smtpd_client_restrictions=permit_mynetworks,reject
       -o smtpd_helo_restrictions=
       -o smtpd_sender_restrictions=
       -o smtpd_recipient_restrictions=permit_mynetworks,reject
       -o smtpd_data_restrictions=reject_unauth_pipelining
       -o smtpd_end_of_data_restrictions=
       -o mynetworks=127.0.0.0/8
       -o smtpd_error_sleep_time=0
       -o smtpd_soft_error_limit=1001
       -o smtpd_hard_error_limit=1000
       -o smtpd_client_connection_count_limit=0
       -o smtpd_client_connection_rate_limit=0
       -o receive_override_options=no_header_body_checks,no_unknown_recipient_checks

Also add the following two lines immediately below the "pickup" transport service:

        -o content_filter=
        -o receive_override_options=no_header_body_checks

This will prevent messages that are generated to report on spam from being classified as spam.

More information can be found from "README.postfix from amavisd-new" and "D.J.Fan"

Reload postfix:

sudo /etc/init.d/postfix reload

Now content filtering with spam and virus detection is enabled.





I even passed the Test step. But after I go inside sentora and try to access webmail (roundcube) , I get that error.

Also in Service Status. I see IMAP and POP3 Port Closed.

But my server have this port opens by default.
Reply
Thanks given by:
#5
RE: Ubuntu 14.04 | Install and Configure Postfix + Amavisd-new + ClamAV + Spamassassin
Check dovecot logs and status if it restarts.
No support using PM (Auto adding to IGNORE list!), use the forum. 
How to ask
Freelance AWS Certified Architect & SysOps// DevOps

10$ free to start your VPS

Reply
Thanks given by:
#6
RE: Ubuntu 14.04 | Install and Configure Postfix + Amavisd-new + ClamAV + Spamassassin
Thanks you!
Reply
Thanks given by:


Possibly Related Threads...
Thread Author Replies Views Last Post
Ubuntu: How to Enable tls/ssl in proftpd Diablo925 2 6 209 04-21-2020, 03:35 AM
Last Post: iraqiboy90
Ubuntu 18.04 or 20.04 Kangarooo 1 442 03-20-2020, 11:39 AM
Last Post: Jettaman
Upgrade to Ubuntu 16.04 from 14.04 HogensHero 7 11 375 10-04-2019, 11:20 AM
Last Post: type-00

Forum Jump:


Users browsing this thread: 1 Guest(s)