Forum

MickeMM · 04-07-2015, 03:37 PM

Hello

I have try to optimize my mysql but i think it dosent work.
I connect SAM Broadcaster to my mysql database on ubuntu, but SAM dont work with my optimized mysql, so i need the default mysql config file that Sentora makes..

Anyone whit a sentora default mysql configfile for Ubuntu...
Thanks

Castey · 04-07-2015, 05:55 PM

Code:

Default my.cnf from sentora (ubuntu).

#

# The MySQL database server configuration file.

#

# You can copy this to one of:

# - "/etc/mysql/my.cnf" to set global options,

# - "~/.my.cnf" to set user-specific options.

# 

# One can use all long options that the program supports.

# Run program with --help to get a list of available options and with

# --print-defaults to see which it would actually understand and use.

#

# For explanations see

# http://dev.mysql.com/doc/mysql/en/server-system-variables.html



# This will be passed to all mysql clients

# It has been reported that passwords should be enclosed with ticks/quotes

# escpecially if they contain "#" chars...

# Remember to edit /etc/mysql/debian.cnf when changing the socket location.

[client]

port        = 3306

socket        = /var/run/mysqld/mysqld.sock



# Here is entries for some specific programs

# The following values assume you have at least 32M ram



# This was formally known as [safe_mysqld]. Both versions are currently parsed.

[mysqld_safe]

socket        = /var/run/mysqld/mysqld.sock

nice        = 0



[mysqld]

secure-file-priv = /var/tmp

#

# * Basic Settings

#

user        = mysql

pid-file    = /var/run/mysqld/mysqld.pid

socket        = /var/run/mysqld/mysqld.sock

port        = 3306

basedir        = /usr

datadir        = /var/lib/mysql

tmpdir        = /tmp

lc-messages-dir    = /usr/share/mysql

skip-external-locking

#

# Instead of skip-networking the default is now to listen only on

# localhost which is more compatible and is not less secure.

bind-address        = 127.0.0.1

#

# * Fine Tuning

#

key_buffer        = 16M

max_allowed_packet    = 16M

thread_stack        = 192K

thread_cache_size       = 8

# This replaces the startup script and checks MyISAM tables if needed

# the first time they are touched

myisam-recover         = BACKUP

#max_connections        = 100

#table_cache            = 64

#thread_concurrency     = 10

#

# * Query Cache Configuration

#

query_cache_limit    = 1M

query_cache_size        = 16M

#

# * Logging and Replication

#

# Both location gets rotated by the cronjob.

# Be aware that this log type is a performance killer.

# As of 5.1 you can enable the log at runtime!

#general_log_file        = /var/log/mysql/mysql.log

#general_log             = 1

#

# Error log - should be very few entries.

#

log_error = /var/log/mysql/error.log

#

# Here you can see queries with especially long duration

#log_slow_queries    = /var/log/mysql/mysql-slow.log








#long_query_time
 
         = 2

#log-queries-not-using-indexes

#

# The following can be used as easy to replay backup logs or for replication.

# note: if you are setting up a replication slave, see README.Debian about

#       other settings you may need to change.

#server-id        = 1

#log_bin            = /var/log/mysql/mysql-bin.log

expire_logs_days    = 10

max_binlog_size         = 100M

#binlog_do_db        = include_database_name

#binlog_ignore_db    = include_database_name

#

# * InnoDB

#

# InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/.

# Read the manual for more InnoDB related options. There are many!

#

# * Security Features

#

# Read the manual, too, if you want chroot!

# chroot = /var/lib/mysql/

#

# For generating SSL certificates I recommend the OpenSSL GUI "tinyca".

#

# ssl-ca=/etc/mysql/cacert.pem

# ssl-cert=/etc/mysql/server-cert.pem

# ssl-key=/etc/mysql/server-key.pem







[mysqldump]

quick

quote-names

max_allowed_packet    = 16M



[mysql]

#no-auto-rehash    # faster start of mysql but no tab completition



[isamchk]

key_buffer        = 16M



#

# * IMPORTANT: Additional settings that can override those from this file!

#   The files must end with '.cnf', otherwise they'll be ignored.

#

!includedir /etc/mysql/conf.d/

MickeMM · 04-12-2015, 09:41 PM

(04-07-2015, 05:55 PM)Castey Wrote:
Code:
Default my.cnf from sentora (ubuntu). # # The MySQL database server configuration file. # # You can copy this to one of: # - "/etc/mysql/my.cnf" to set global options, # - "~/.my.cnf" to set user-specific options. # # One can use all long options that the program supports. # Run program with --help to get a list of available options and with # --print-defaults to see which it would actually understand and use. # # For explanations see # http://dev.mysql.com/doc/mysql/en/server-system-variables.html # This will be passed to all mysql clients # It has been reported that passwords should be enclosed with ticks/quotes # escpecially if they contain "#" chars... # Remember to edit /etc/mysql/debian.cnf when changing the socket location. [client] port = 3306 socket = /var/run/mysqld/mysqld.sock # Here is entries for some specific programs # The following values assume you have at least 32M ram # This was formally known as [safe_mysqld]. Both versions are currently parsed. [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] secure-file-priv = /var/tmp # # * Basic Settings # user = mysql pid-file = /var/run/mysqld/mysqld.pid socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp lc-messages-dir = /usr/share/mysql skip-external-locking # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. bind-address = 127.0.0.1 # # * Fine Tuning # key_buffer = 16M max_allowed_packet = 16M thread_stack = 192K thread_cache_size = 8 # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP #max_connections = 100 #table_cache = 64 #thread_concurrency = 10 # # * Query Cache Configuration # query_cache_limit = 1M query_cache_size = 16M # # * Logging and Replication # # Both location gets rotated by the cronjob. # Be aware that this log type is a performance killer. # As of 5.1 you can enable the log at runtime! #general_log_file = /var/log/mysql/mysql.log #general_log = 1 # # Error log - should be very few entries. # log_error = /var/log/mysql/error.log # # Here you can see queries with especially long duration #log_slow_queries = /var/log/mysql/mysql-slow.log #long_query_time = 2 #log-queries-not-using-indexes # # The following can be used as easy to replay backup logs or for replication. # note: if you are setting up a replication slave, see README.Debian about # other settings you may need to change. #server-id = 1 #log_bin = /var/log/mysql/mysql-bin.log expire_logs_days = 10 max_binlog_size = 100M #binlog_do_db = include_database_name #binlog_ignore_db = include_database_name # # * InnoDB # # InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/. # Read the manual for more InnoDB related options. There are many! # # * Security Features # # Read the manual, too, if you want chroot! # chroot = /var/lib/mysql/ # # For generating SSL certificates I recommend the OpenSSL GUI "tinyca". # # ssl-ca=/etc/mysql/cacert.pem # ssl-cert=/etc/mysql/server-cert.pem # ssl-key=/etc/mysql/server-key.pem [mysqldump] quick quote-names max_allowed_packet = 16M [mysql] #no-auto-rehash # faster start of mysql but no tab completition [isamchk] key_buffer = 16M # # * IMPORTANT: Additional settings that can override those from this file! # The files must end with '.cnf', otherwise they'll be ignored. # !includedir /etc/mysql/conf.d/

Thanks! have a nice day Mr Smile

Possibly Related Threads…
Thread	Author	Replies	Views	Last Post
How to set up File Manger for Sentora?	donaldaugust	1	3 ,233	01-11-2022, 05:01 AM Last Post: Nigel
MySQL Database user prefix	MosleyCale	1	4 ,930	10-17-2020, 09:11 PM Last Post: Ron-e
Senator crash problem with mysql	provokas	3	9 ,647	08-20-2020, 04:11 AM Last Post: Your Creator